Page 1 of 1

Thermostat Housing

Posted: Wed Feb 25, 2015 2:15 pm
by Sspreso
Seems that my 2012 Coupe has been struck by the plastic gremlins. First the rear hatch won't close and it's was due to a broken plastic safety latch.
Now I have the infamous coolant leak of the thermostat housing warping. Why modern car makes feel plastic is the solution for everything... :evil:

Re: Thermostat Housing

Posted: Wed Feb 25, 2015 3:12 pm
by MiniManiac
That is quite terrible. The thermo housing is the next thing to go on my 08.

Re: Thermostat Housing

Posted: Wed Feb 25, 2015 5:40 pm
by Minidave
Sspreso wrote:Seems that my 2012 Coupe has been struck by the plastic gremlins. First the rear hatch won't close and it's was due to a broken plastic safety latch.
Now I have the infamous coolant leak of the thermostat housing warping. Why modern car makes feel plastic is the solution for everything... :evil:
Still under warranty, isn't it?

Re: Thermostat Housing

Posted: Thu Feb 26, 2015 3:10 pm
by Sspreso
While technically my car has a warranty, the question of it being valid comes up for some reason...
Image

Re: Thermostat Housing

Posted: Thu Feb 26, 2015 3:47 pm
by Minidave
Did you talk to Isaac?

I'm not sure what you've done would invalidate the work on the thermostat....might be worth a phone call or to drop by and ask.

Re: Thermostat Housing

Posted: Fri Mar 20, 2015 8:14 am
by Sspreso
Turns out it wasn't the thermostat housing, but instead the coolant gasket on the oil filter housing. Such a common issue that the gasket is on backorder. Luckily Chris at Baron was able to hook me up and no more leaks.

Re: Thermostat Housing

Posted: Fri Mar 20, 2015 8:33 am
by MiniManiac
Sspreso wrote:Turns out it wasn't the thermostat housing, but instead the coolant gasket on the oil filter housing. Such a common issue that the gasket is on backorder. Luckily Chris at Baron was able to hook me up and no more leaks.
I just fixed that leak yesterday. Took quite a bit to get everything off but no more leaks!

Re: Thermostat Housing

Posted: Mon Oct 26, 2015 3:52 pm
by dsopoci
I had mine replaced on my 2009 at Baron, it was around $530 or so. Now I am having to replace the o-ring on the high pressure fuel pump. :x